With the engine directly over
the rear wheels a zero turn mower gets excellent traction without
having to install snow chains or grippers! The speed and manuverablity
of a zero turn cuts down on your mowing time, think what it will
do plowing snow! Tough enough to be used for pushing dirt, sand
and gravel with ease.
Zero turn radius mowers have proven
to be one of the best time savers in the past few years, but
why let that expensive mower sit idle during the off-season?
Zero Turns can also be used as a great platform for plowing snow!
Country Zero Turn Equipment has developed an inexpensive and
simple Universal Mounting Bar to put that Zero Turn Mower to
work year around. With the speed and manuverability of a zero
turn, you can plow snow 3 times faster than with a garden tractor
or conventional snow blower! Tough enough to be used to grade
dirt, sand and gravel year around! Check back often as we are
developing new zero turn mower attachments to be released soon.
Toll Free: 1-800-335-1880
Office Hours Monday-Friday 8:00 am - 5:00 pm EST.
FREE SHIPPING to the Continental U.S. 48 States
Universal Mounting Bar with 4 ft. snow blade
The Universal Mounting Bar will fit all makes
of zero turn radius mowers. To operate, simply step on the foot
pedal to raise the snow plow, take your foot off the pedal to
lower the blade into position. No electric or hydraulics needed!
Our blades are tough enough to be used as small dozer or grader
blades during the warm weather months!
The heart of our design is the revolutionary
Universal Mounting Bar. This patent pending system makes lifting
and lowering the snow blade quick and easy by simply pushing
the foot pedal down or allowing it to return up by lifting your
foot. Fully adjustable, the Universal Mounting Bar can be mounted
on virtually any make and model of mid-mount zero turn radius
mowers available on the market today!
Installation of the Universal Mounting
Bar can be done two ways.1: Clamp-on adapters are included to
secure the mounts to the zero turn frame or 2: You can drill
4 holes in the front caster wheel support frame and install the
pivot brackets. The choice is yours. The design of the brackets
allow for the curves and angles found in the front frame of some
makes of zero turn mowers. Then simply adjust the Mounting Bar
center frame to the height and length you need, bolt in the snow
plow and you are ready to go! All of our snow blades are designed
to be used in 3 angle positions and come with a replaceable edge
and bottom height adjusters.
Click the > button in
the bottom of the photo below to watch a 60 second video clip
A Zero Turn Mower Equipped with a 5 ft snow
plow clearing a parking lot quickly and easily.